NeoPhotonics SFP+ optical module product family adds new version

On September 6th, NeoPhotonics company ( NPTN ), an intensive bandwidth, high speed communication network using PIC ( photonic integrated circuit ) components, modules and subsystems leading designer and manufacturer, today announced that its SFP+ optical module product family has a new version. These new upgraded NeoPhotonics version with the existing CPRI ( general public radio interface ) 6G SFP+ optical module as well as the application of 10G Ethernet and OC-192/STM-64 SONET/SDH transmission 10G SFP+ transceiver module product portfolio.

The new version of NeoPhotonics SFP+ optical module dedicated network towards smaller power consumption and more to keep feet module of the green transformation, the transformation reduces the transmission system consumption and support more high density panel to adapt to the increasing bandwidth demand. SFP+ MSA can make each module without CRD ( clock and data recovery ) function at the time of maximum power of 1.5 watts, however early functional equivalent of the XFP MSA optical module power is 3.5 watts, or more than two times. The NeoPhotonics product family has several versions of 40km coverage ( ER ) and 80km ( ZR ) distance and supports a variety of communication protocol.

" New SFP+ optical module introduction to fulfill our in ultra high speed optical module market commitment, " NeoPhotonics CEO and chairman Tim Jenks said, " we are glad to support customers in lower broadband network power consumption and carbon footprint of the green commitment, to meet a higher density optical port increased demand. "

Without CRD function of the SFP+ optical module supports 10G Ethernet transmission and follow the IEEE 802.3-2005 and 802.3-2008 standard. With the function of CRD SFP+ optical module supports OC-192/STM-64 SONET/SDH and follow the ITU-T G.709 OTU2 defined rate of optical transmission network. All of these modules to meet Telcordia GR-468 CORE certification requirements, covering the extended working temperature range of -5 to +85 oC ( E-Temp ). NeoPhotonics can now provide bulk ER and ZR SFP+ optical module samples, the products comply with RoHS5 or RoHS6 requirements.

NeoPhotonics will be in Shenzhen Exhibition Center from September 6th to 9 on the CIOE T323 booth display strain SFP+ transceiver module, earlier exhibited and fiber to the home ( FTTH ) optical transceiver module and based on a photonic integrated circuit ( PIC ) technology and 40G/100G products.

On the NeoPhotonics and photoelectricity Frestech

NeoPhotonics is PIC ( photonic integrated circuit ) components, modules and subsystems leading designer and manufacturer, the products used in intensive bandwidth, high speed communication network, which can make the communication network to realize low cost high speed data transmission and effective bandwidth allocation.

NeoPhotonics is headquartered in San Jose California, Silicon Valley and Chinese Shenzhen ( NeoPhotonics subsidiaries: Frestech photoelectricity ) is the project management and production facility is located, the two have passed the ISO 9001:2000 quality management system certification. NeoPhotonics was in 2011 June was included in the reprogramming of the Russell 3000 index.

Sichuan communications new rainbow light supercontinuum fiber laser

Sichuan rainbow light communication science and technology limited company in July 1, 2011 with the YSLP reached a strategic cooperation agreement, recently launched a strong supercontinuum fiber laser, the product coverage of wavelengths from the visible to infrared band ( 400~2000nm ), the user can customize the near infrared ( 1000~1700nm ).

This product and the same type of compared to other manufacturers have a super power flat output mode, high reliability, widely used in communications, testing and sensing technology.

Rainbow light communication is by flood lighting in Chengdu western high-tech investment in the construction of the enterprise. The company's core team has more than 10 years with the industry background, has a wealth of domestic and foreign research and development and management experience. Rainbow light communication to the passive optical communication devices, laser and optical fiber sensing technology in the production and sales.

Company production base is located in Chengdu western high-tech, convenient logistics, industrial concentration. Plant covers an area of 20 acres, production workshop 12, with flood lighting good support and management, rainbow light communications planning 5000 square meters super-clean workshop, early has been put into 1000 square meters, and is equipped with various kinds of imported testing equipment, the company's main products are high power isolator, high power fiber amplifiers, polarization device and fiber grating.

Rainbow light communication uphold integrity, professional, pragmatic, win-win mission, continuously providing the market with competitive products and services, and strive to become first-class high power application of the leading solutions provider.

Source new complete end-to-end 10G EPON transceiver scheme

Leading products are widely used in telecommunication systems and data communication networks optical communication equipment vendor Source Photonics company, today announced the launch of 10G EPON OLT and 10G EPON industrial temperature ONU transceiver series products.

10G EPON technology provides a powerful point to multiple point solutions to meet the increasing bandwidth requirements, as well as in the communication infrastructure access network with lower maintenance cost. Source Photonics today announced a complete end-to-end 10G EPON network deployment scenarios, including 10G EPON and 10G EPON symmetry application of asymmetric application solutions.

Source Photonics announced the launch of SFP+ packaging industrial temperature 10G EPON ONU transceiver, covers a wide range of applications. With Source Photonics integrated technology, the 10G EPON ONU IEEE 802.3av-2009 PRX products in full compliance with 30+ and PR30+ interface standard. PRX 30+ and PR30+ ONU can support a power-saving function, effectively reduce the power consumption when the system is in the idle mode.

Source Photonics also launched a XFP package 10G EPON OLT symmetrical transceivers, became 10G EPON transceiver series products of the latest member. 10G EPON OLT IEEE 802.3av-2009 PR30 symmetrical transceivers in full compliance with the PRX30 standard and the IEEE interface and 802.3ah-2008 1000Base-PX20 interface standard.

Source Photonics 10G EPON OLT introduced a new symmetric transceiver and the I-Temp 10G EPON symmetric and asymmetric ONUs provided in the same PON network system of flexible conversion and upgrade.

Source Photonics in September 6, 2011 to 9 at the China International Optoelectronic Exposition ( CIOE ) to display the new product.

About Source Photonics

Source Photonics is a leading supplier of optical communication products, its products are widely used in telecommunication systems and data communication network. The company's business related to various types of optical communication products R & D, production and sales from the optical devices, modular products until the subsystems, including the now widely applied in the enterprise network, access network and metropolitan area network passive optical network ( PON ), subsystem and optical module products, especially Source Photonics company for fiber to the home ( FTTP ) provide subsystem products, many telecommunications service providers used to provide image, voice and data services.

Capella WSS ROADM/DWDM new product flexibility design

The industry-leading WSS device suppliers Capella Intelligent System Co today launched CR-EX 1X20 WSS products. The product has the advantages of wide band, high extinction ratio, low insertion loss and crosstalk, built-in performance monitoring and many other features.

The product of all ports to maintain consistent high performance also let ROADM design more flexible, cascade amplifying relay node number more, the lower the cost of.

Products using Capella 's patented technology, CR-EX with the CR50 and CR100 products have the same size, can support a fixed loss or fixed power mode, let DWDM equipment manufacturers can choose the best network control solutions.

Capella said CR-EX products with the industry, similar products the best performance, the smallest size and the lowest power consumption. The internal channel optical power monitoring function, 1X20 path or 20X1 channel function or mixed add / drop function support flexible ROADM system design.

Opnext released 100G DWDM and wavelength tunable XFP optical module